- All elements with a “Fall” or “Multiple Touches” will be deducted: ( - 1.0)
| “Family 1” Dynamic Strength (A-Frame, Straddle Cut, Explosive High-V) | Small | Medium | Large |
| Elements without airborne phase | 0.3 | ||
| A-Frame: pike position more than 60° | 0.3 | ||
| A-Frame: hands and feet do not leave and/or land the floor at the same time with airborne phase | 0.3 | ||
| Straddle Cut: straddle position is not shown | 0.5 | ||
| Straddle Cut: straddle cut is not shown | 0.5 | ||
| Straddle Cut: hips higher than shoulders before the cut | 0.5 | ||
| Straddle Cut not performed in a vertical plane | 0.5 | ||
| Explosive High-V: back not parallel to the floor | 0.3 |
| “Family 2” Static Strength (Support, V-Support, Planche) | Small | Medium | Large |
| The skill is not held for at least 2-seconds | 0.5 | ||
| Unbalanced / unstable body during the skill | 0.1 | 0.3 | |
| Straddle Support: legs less than 90° | 0.1 | 0.3 | |
| V-support: legs not in vertical line | 0.1 | 0.3 | |
| High V-support: back not parallel to the floor | 0.1 | 0.3 | |
| High V-support: extra preparation | 0.3 | ||
| Horizontal Supports: body / legs are not parallel (above or below) to the floor | 0.1 | 0.3 | 0.5 |
| Horizontal Supports: arms not extended | 0.1 | 0.3 | |
| Straddle Planche: legs wider than 120° | 0.3 | 0.5 |
| “Family 3” Leg Circle (Flair, Helicopter) | Small | Medium | Large |
| Flairs: Hips are not lifted during the extension phase | 0.3 | ||
| Flairs: legs pushed forward into straddle position | 0.5 | ||
| Helicopter: turning on the bottom before leg circles | 0.3 | ||
| Helicopter: performed with arms holding legs | 0.3 | ||
| Incomplete turn | 0.1 (0°- 45°) | 0.3 (>45°) |
